Filter By:
Parts & Accessories

$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

$12.99
Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages.
Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

$37.00
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in

$45.00
The Dakine 3L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

$4.99
- Customize your race belt with this lightweight slide on accessory
- Holds up to four gel packs
- Compatible with all Ergo & Ultralight Belts

$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage.
-45mm of adjustability
-28 oz water bottles max
-Constructed of AL-6061

$9.99
Clamp your water bottle cage securely to your handlebars with Electra's Bottle Cage Adapter. Easy installation and universal bottle cage compatibility make this accessory a no-brainer.
• Allows for the installation of bottle cages on bicycles without frame mounts
• Mounts to handlebar
• Bottle cage sold separately

$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.

$45.00
Update or replace your lumbar reservoir. This 2-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 70-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking.
- 2L / 70 oz Dakine x Hydrapak 3D lumbar reservoir
- Blaster high-flow bite valve w/shut-off
- Quick-disconnect tubing for easier refills
- Molded 3D bottom provides better shape inside the pack
- Molded 3D bottom for much better drying between rides

$14.99
Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

$36.95
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts.
- Adjustment Width: 75-150mm
- Construction (Plate): 6061-T6 Aluminum
- Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip
- Weight: 1.9oz (55g)

$12.00
The Replacement Activated Carbon Filter is compatible with the Crux 2L Reservoir Filtration Kit filtered by LifeStraw or the Reservoir Filter Kit accessory. Chlorine is reduced and bad odor and taste are removed when paired with an existing Hollow Fiber Filter and used as part of the two stage LifeStraw filtration system.

$40.00
The Dakine 2L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter

$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter

$11.00
Keep your water bottles clean and free of mysterious foreign objects. The CamelBak Bottle Brush Kit includes a large brush for scrubbing the inside of your bottle as well as small straw brush for cleaning the straw, cap, and bite valve.

$11.49
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!

$99.95
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

$20.00
Fill it with water and set it on the nightstand. Pack it in your bag for a cold drink on the trail. However you use it, Surly's Silicone Pint Glass is a lot like a normal pint glass except it's less likely to break if you fall off your bike or accidentally knock it over during a scary dream.
- Great insulation to keep beverages cold
- Made of taste-free, odor-free, dishwasher-safe, 100% food-grade silicone

$4.99
- Customize your race belt with our removable micro race locks with quick release clasp
- Fully adjustable race bib toggles
- Hi-viz reflective accents
- Compatible with all Ergo & Ultralight Belts

$69.00
Trek into unknown adventure with the confidence of clean drinking water. The Crux 2L Reservoir Filtration Kit filtered by LifeStraw carries 2 liters of water that pass through two separate stages of filtration for safe hydration. The Hollow Fiber Filter removes bacteria, parasites, and microplastics and the Activated Carbon Filter reduces taste, odor, and chlorine. The wide-mouth fill port includes a tethered leak-proof cap and ergonomic handle for a sturdy fill. An on/off lever prevents unwanted drips and the Big Bite Valve self-seals after each sip. Hydroguard anti-microbial technology inhibits the growth of bacteria in the reservoir and tube, and all components are free of BPA, BPS, and BPF. Pack assembly is a breeze with an easy-to-load low-profile reservoir baffle and Quicklink System that features an auto shut-off to prevent leakage. Convert into a gravity bag by pairing with CamelBak's Reservoir Gravity Kit (sold separately). Safe hydration, trustworthy filtration.

$127.95
Introduction
- Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years.
- Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag.
Storage
- We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP.
- As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG.
- Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG.
Hydration
- With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers.
Adjustable Mounting
- One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation.
- In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions.
Lightweight
- We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams.
Bottom Line
- The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros!
Includes:
- Carbon Sonic chassis
- One Pair X-Straps
- All hardware and instructions
Material
- Carbon Fiber proprietary unidirectional orientation.
Weight
- Chassis 49 grams, Hardware 30 grams. Total 79 grams
Limited Lifetime Warranty
- Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.

$10.95
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options.
- Fits tubes 20 - 60mm
- Engineering grade polymer
- Max load: 1.5 kg / 3.31 lb
- 26 g / 0.92 oz (2 pcs)

$29.95
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions.
- Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside
- Includes: plastic cage, Allen key, screws and washers
- Fits and encloses up to an average 20oz bottle and has enough room for a heat pack
- Extended zipper pull for easy open close while riding with winter gloves
- Reflective material on logo

$90.00
Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Even better, the reservoir filter kit has easy collapsibility for simple storage when the party's home for the week. Repurpose Green Sustainability Badge: Made with safer chemicals.
Page 1 of 2
Next page